- With so many diamonds to pick from, finding the one that’s best for you might be intimidating, especially when compared to a jewellery store where choice is much more limited. Choose diamond rings in Australia by following this step-by-step tutorial. This information may be helpful as a starting point in your diamond quest.
- The recipient’s preferred diamond shape is firstly determined. Consider a round or princess cut if you are unsure.
- Decide on a minimum carat weight according to the preferences of the receiver. One carat diamonds are scarce in Australia. Therefore, even the most stunning half-carat diamond will disappoint them.
- Once you’ve selected the form and carat weight minimums in steps 1 and 2, you may begin making compromises in the following order until you find a diamond that suits your budget:
- To begin, decrease the clarity. Before making sacrifices in other areas, limit yourself to VS2.
- After that, decrease the Color. Before making compromises in other areas, go as low as possible.
- After that, reduce the cut. Reduce the quality of your round diamonds to Very Good or better before compromising on other aspects of the diamond.
- Smaller carat weight may be an option if the diamonds meet your new specifications within your price range. Visually, a ten% variation in carat weight is nearly impossible to see.
- After following the procedures outlined above, you can restart the process with new criteria if you’re still above your budget.
- To begin, lower clarity even more.
- The next step is to lower the colour saturation.
- Lastly, lower the cut. The lowest quality diamond rings in Australia are Good, whereas fancy-shaped diamonds are Fair.
- Your tastes and requirements will determine your next move. Your tastes and requirements will determine your next move if you’re still over budget.
- A diamond of SI2 clarity may be an option if it weighs less than one carat.
- An L-M colour diamond set in yellow gold may be allowed if it is both a brilliant-cut brilliant-cut and less than 1.50 carats in weight.
- A Fair cut round or a sophisticated form might be a good option if you’re looking for something more significant.
Tips for Buying Shapely
For the most part, persons in Australia given diamonds have a specific form in mind. When it comes to the form of the diamond, the recipient should be included in the decision-making process, if at all feasible. In particular, this is true for diamonds in fancy shapes, which are popular choices for engagement rings. A round diamond is a good choice if no other preferences have been mentioned. A round diamond’s brightness and scintillation in Australia exceed those of other forms, and it is put in virtually any ring setting.
Tips for Buying Carat Weight
Look for diamond rings in Australia with carat weights around half, three-quarters, one carat, etc. As a result, these diamonds are sometimes offered at a lower price than comparable full-weight diamonds. When it comes to price per carat, a.90-carat diamond is often less expensive than a total 1.00-carat diamond. At first look, they are nearly indistinguishable. Diamonds of different carat weights may appear the same size when viewed above.
Reduce Buying Advice
GIA did not invent the numerous cut grades today, unlike the other “Cs” (Carat Weight, Color, and Clarity). Even while merchants use terminology like “Excellent,” “Very Good,” “Fair,” and “Poor” to characterise the quality of a product’s cut, the terms aren’t consistently applied. However, a diamond seller in Australia can designate whatever cut grade they like, depending on their chosen collection of parameters. It is common for retailers to use terminology like “Signature Ideal” and “Excellent” to describe their products, while some use “Ideal” to describe all three. When comparing cut grades from various stores in Australia, be aware that they are likely to be incongruous.