A fingerboard, a fun toy, is known as a tech deck. It is a functional miniature of a skateboard that you ride with your fingers rather than your feet. A customized fingerboard is a pretty expensive device that is scaled-down with graphics, trucks, and plastic or ball-bearing wheels, just like a skateboard.
Skateboarding is a square weather sport, but you can remain active all day long with a small fingerboard. The technology designers use to shape wood to design furniture, sports equipment, and other creative stuff is heat and pressure. Similarly, such a type of technology is used to prepare a fingerboard.
If you want to design a perfect fingerboard according to your taste, here are a few steps that can help you to achieve your goal
Step 1: Preparation Of the Wooden Surface
If you want your own customize fingerboard, the first step is to cut your desired piece of wood into strips. While cutting the wood, remember that each layer fragment should run at a 90 degree to the layer beneath it. In this way, you will be capable to give super strength to the layers.
If you want a creative custom fingerboard deck, you can have it by using various species. You can also find great deals on woods to make your board unique.
Step 2: Application Of Glue and Clamps in the Fingerboard Mold
The second step to making pro fingerboards is the application of a thin layer of wood glue to the strips. After doing this, assemble your strips in the desired order to create your lamination and then club it in the mold. It will help you protect the wood from getting stuck to the mold and remove it later.
You have to lock the mold up tightly to prepare a custom fingerboard. You can also use drill press clamps or simple G Clamps on your overhanging wood to compress it together. This way, you will find no gaps in your layers. Using the fingerboard mold is the greatest option for creating a skateboard toys tech deck as it is inexpensive and easy to find.
Step 3: Removal Of the Mold From the Clamp
Now, it’s time to check if the glue you have applied has been cured. If the glue has not cured, you have to wait for the glue to cure to remove the mold from the clamp fully. If you skip ahead or remove the mold early, your fingerboard won’t be at full strength. You can mark the edges of the mold on the lamination and cut it with a craft knife before taking it out of the mold.
Step 4: Shaping the Fingerboard
Shaping is a fun part, and you can do it with a simple rotary tool, a linisher, or a bench sander. If you are trying to shape your fingerboard with multiple passes, you can take the required time until the shape and size of your fingerboard do not look good.
If you are thinking of using a circular sander, it would be better to draw the shape on the top of the board to save your fingers. Once you have drawn the shape onto the deck, it’s time to remove the excess. A circular sander is the quickest way that helps you to save your veneer and to get a nice deck with round ends.
While shaping a fingerboard, you can use sandpaper or a little white spirit to clean up the top or bottom to finish your deck—this way, the finish makes the grain pop later.
Step 5: Drilling Holes For Screws
Drilling is a very crucial stage in the process of preparing a fingerboard. To prepare a fingerboard, use a drill bit slightly larger than the screws of your fingerboard to clear holes in the spot marked by the mold.
You can also countersink the holes using a larger drill bit or countersink bit to settle the screws to the board. Then, when you put the screws in your fingerboard, they will sit flush with it.
Step 6: Applying Grip Tape
This step is last but not least to prepare your fingerboard. You have to cut out a rough shape and stick it to the top of the board with the adhesive of your choice. You can use a simple spray or a few clips to the grip tape that will help you to hold the grip tape in its place. After applying grip tape, clean up the extra grip tape carefully and brush away the dust.
Hopefully, this blog will help you learn how to make a wooden fingerboard.
For more valuable information visit this website